Air purifying respirator is a positive pressure respirator that uses a blower to force the ambient air through a filter to a hood or mask. A typical system includes a blower unit, filter/cartridge, battery, loose-fitting hood, and breathing tube. The HEPA filter is a high efficiency filter that captures 99.99% of particulates with a mass mean of 0.3-micron.

• Positive pressure vs. negative pressure
• Unrestrictive breathing; not taxing to the lungs during physical activity
• Light weight and comfortable
• Eye, face and respiratory protection in one system
• Large viewing window; maximum viewing for wearer and calming for patients
• No fit test

• Includes respiratory, face and eye protection in one system
• No fit test required
• Easy to decontaminate
• Improved breathing and overall comfort compared to an N95 mask
• LF-Series hood APF up to 2.5X greater than an N95 mask
• Can use stethoscope with LF-Series hood
• EBH Backpack improves mobility for PAPR wearers

EVA PAPR with 20LF2L Loose Fitting Hood (EVA20LF2L)

• Assigned protection factor (APF) 2.5X greater than an N95 mask 
• Improves breathing and overall comfort compared to an N95 mask 
• Loose-fitting facepiece designed for use with a stethoscope 
• No fit test 

EVA PAPR with 20TICT Full-Face Hood (EVA20TICT)

• Assigned protection factor (APF) 2.5X greater than an N95 mask 
• Improves breathing and overall comfort compared to an N95 mask 
• Loose-fitting facepiece designed for use with a stethoscope 
• No fit test 

EVA PAPR with RT3T Hood (EVART3T) 

• Assigned protection factor (APF) 2.5X greater than an N95 mask 
• Improves breathing and overall comfort compared to an N95 mask 
• Loose-fitting facepiece designed for use with a stethoscope 
• No fit test 

Note: Systems come with (1) PAPR, (1) PAPR belt, (1) breathing tube, (1) battery, (1) battery charger, (1) loose-fitting hood. Note: Filters not included.

Airflow is user adjusted between two speeds delivering 7.0 cfm (low speed) and 8.5 cfm (high speed). 

Yes, the EVA blower unit, loose-fitting hoods are manufactured in Cynthiana, KY. 

Replacement Batteries and Chargers

• EVASMC Quick charger (1 port) 
• EVAGC Tabletop gang charger for EVABAT1 (6 ports) 
• EVABAT1 Lithium Polymer Battery Pack (black)

Replacement Cartridges 

• PAPRFC3 HE (6 per box) 
• PAPRFC4 OV/AG/HE (6 per box) 
• PAPRFC5 AM/FM/MA/AG/HE (6 per box) 

Replacement Parts and Accessories 

• EVABELT1 Replacement belt 
• EVABELT2 Vinyl replacement belt 
• EVAEXT1 Extension belt kit  
• PAPRSUSP1 PAPR suspenders (1 pair) 
• PA1AFI Air flow indicator  
• PAHBT Powered air hood breathing tube assembly; standard length 
• PAHBTXS Powered air hood breathing tube assembly; short length 
• PAHBTXL Powered air hood breathing tube assembly; long length 
• PA1BT Hood breathing tube assembly; includes tube and clamp; standard length  
• PA1BTXS Hood breathing tube assembly; includes tube and clamp; short length  
• PA1BTXL Hood breathing tube assembly; includes tube and clamp; long length 
• PA20LFBT Loose fitting facepiece breathing tube assembly; standard length  
• PA20LFBTXS Loose fitting facepiece breathing tube assembly; short length  
• PA20LFBTXL Loose fitting facepiece breathing tube assembly; long length 
• PA1BTS Breathing tube/cartridge seal S18051 Breathing tube clamp (10/pack) 
• EVABKPK2 Ergonomic backpack harness  

Loose-fitting hoods are latex-free 

Supplied Air Respiratory (SAR) air comes from an external source with positive pressure and tight- or loose-fitting head tops. Tight fitting requires fit testing. 

Bullard offers 3 SAR systems – see below and view products on the respiratory page: https://www.bullard.com/products/respiratory/

EDP10 Free-Air Pump with 20TIC Full-Face Hood (CC20SYS)

• Assigned protection factor (APF) 100X greater than an N95 mask
• Improves breathing and overall comfort compared to an APR
• No fit test
• Sources air from clean environment
• Includes Hood, Breathing Tube, Flow Control, 100’ Airline and Free-Air Pump

EDP10 Free-Air Pump with Spectrum Full Face Mask (SPECLSYS)

• Assigned protection factor (APF) 100X greater than an N95 mask
• Improves breathing and overall comfort compared to an APR
• No fit test
• Sources air from clean environment
• Includes Mask, Breathing Tube, Flow Control, 100’ Airline and Free-Air Pump

Clean Air Box with 20TIC Full-Face Hood (CC20CABSYS)

• Assigned protection factor (APF) 100X greater than an N95 mask
• Improves breathing and overall comfort compared to an APR
• No fit test
• Sources air from compressor
• Clean Air box monitors for Carbon Monoxide
• Includes Hood, Breathing Tube, Flow Control, 100’ Airline and Clean Air Box

Bullard CC20 Series respirators have a limited service life. Therefore, a regular inspection and replacement program must be conducted. Bullard CC20 Series respirators and all component parts and assemblies should be inspected for damage or excessive wear before and after each use to ensure proper function. Immediately remove the respirator from service and replace parts or assemblies that show any sign of failure or excessive wear that might reduce the degree of protection originally provided.  

Inspect the hood material for rips, tears, or damage from excessive wear that might reduce the degree of protection originally provided. The respirator’s plastic lens should be inspected for cracks, scratches or any other signs of damage. If damage is detected, remove the hood from service and discard immediately.

Face Protection refers to a type of PPE that protects the users entire face from the surrounding environment.

• Full face coverage that protects from splashes 
• Offers an additional layer of protection that is compatible with other PPE including goggles and masks 
• Non-limiting to sight or movement 
• Easily cleaned (acetate visors allow for chemical cleaning) 
• Comfortable, hands-free protection 

Sentinel 1 

• Features a black ABS crown protector to help shield the forehead 
• Easily accommodates primary eye protection and half face-piece style respirators 
• Comfortably fits a wide variety of head sizes, ranging from 6 1/2″ to 8″ 
• Meets or exceeds ANSI/ISEA Z87.1 standard when used with Bullard visors 
• Brow pads are washable and replaceable for optimal sanitizing in medical environments 
• For use with all Bullard Visors except 840MX2 (acetate), 840PX2 (polycarbonate), or 840TX2 (TritanTM)  

Sentinel 2

• Features a black ABS crown and chin protector, providing full face protection 
• Easily accommodates primary eye protection and half face-piece style respirators 
• Comfortably fits a wide variety of head sizes, ranging from 6 1/2″ to 8″ 
• Meets or exceeds ANSI/ISEA Z87.1 standard when used with Bullard visors 
• Brow pads are washable and replaceable for optimal sanitizing in medical environments 
• For use with Bullard 840MX2 (acetate), 840PX2 (polycarbonate), 840PX2W3 (Shade 3 polycarbonate), 840PX2W5 (Shade 5 polycarbonate), or 840TX2 (TritanTM) visors 

Polyester

• Great for general use in scenarios in which chemicals are not being used 
• 840ME, E840ME 

Acetate

• Offers chemical resistance which allows the visor to be cleaned with chemicals for optimal sanitizing in medical environments 
• 640M, 640G, 840M, 840MX2, 840MG, 840MH, 860H, CS40, 1040